I plant of the chromium oxide, alumina ceramic coating and has a tungsten carbide metal-resistant coating wear, corrosion resistance, high temperature, and other fine performance. 我厂所制备的氧化铬、氧化铝陶瓷涂层和碳化钨金属涂层有着耐磨损、耐腐蚀、耐高温等优良性能。
The Influence of Neodymium on Thickness and Surface Quality of Micro-arc Oxidation Ceramic Coating Nd对镁合金微弧氧化陶瓷层厚度及表观质量的影响
Numerical Simulation on the Temperature Field and Microstructure Analysis of Laser Remelting Composite Ceramic Coating on TiAl Alloy Surface TiAl合金表面激光重熔复合陶瓷涂层温度场数值模拟及组织分析
Research Preparing and Function of High-performance Ceramic Coating for Thermo-spraying 高性能陶瓷热喷涂料制备与性能研究
Research on the Formation and Mechanism of Ceramic Coating Prepared by Micro-Arc Oxidation on Surface of Aluminum Alloy 铝合金表面微弧氧化陶瓷膜生成及机理的研究
Effects of processing parameters on performances of micro-arc oxidation ceramic coating on magnesium alloy in alkali bath 碱性体系中工艺参数对镁合金微弧氧化陶瓷膜的性能影响
Ceramic Coating of Aeroengine Turbine Blade 陶瓷涂层在航空发动机涡轮叶片表面处理中的应用
Microstructure and Properties of Mo_2FeB_2 Ceramic Coating by Reactive Flame Spraying 反应火焰喷涂Mo2FeB2金属陶瓷涂层的组织和性能
The suspension principle of Li-Bentonic slip and its application in ceramic coating were explored. 探讨了锂基膨润土泥浆的悬浮特性和机理及其在陶瓷涂料中的应用效果。
Preparation of Ceramic Coating for Drilling Pump Liner by Plasma Spraying 用等离子喷涂技术制备钻井泵缸套金属陶瓷涂层
Lossless evaluation of corrosion resistance for micro-arc oxidation ceramic coating on magnesium alloy 镁合金微弧氧化陶瓷膜耐蚀性的无损评价
Abstract: Ceramic coating on the surface of workpiece can improve its properties remarkably. 文摘:在工件表面用喷涂方法形成陶瓷涂层,可以显著改善其性能。
Study on the Preparation of Ceramic Coating on Aluminum Alloy by the Solid Phase Response and its Performance 铝合金固相反应法制备陶瓷涂层及其性能的研究
Application of Anticorrosive Ceramic Coating to Fitting-Water-Tank in Oil Field 陶瓷复合涂层在油田注水罐防护中的应用
The phase and microhardness distributions in ceramic coating formed by microplasma oxidation on LY12 aluminum alloy were investigated using X-ray diffractometer and microhardness tester. 使用X射线衍射仪和显微硬度计测定了LY12铝合金微等离子体氧化陶瓷膜沿深度方向的相分布及显微硬度变化曲线。
Ceramic coating was obtained by micro-arc oxidation on LY12 aluminum alloy in sodium silicate and sodium hydroxide electrolyte, and examined by SEM and TEM. 在硅酸钠和氢氧化钠电解液中利用微弧氧化技术在LY12铝合金表面生成陶瓷膜层。
Research on Plasma Spraying in the Preparation of Ceramic Coating Blade 等离子喷涂制备陶瓷涂布刮刀的研究
The utility model can prepare the large standard panel for one time, has simple processing and low cost, and can be reused by spraying newly the coating layer after the ceramic coating is worn out. 本实用新型能一次性制备大规格面板,加工容易、成本低,而且当陶瓷涂层磨损后,还可重新喷涂涂层后重用。
Analysis on Microstructure and Phase Structure of Al_2O_3 Ceramic Coating 氧化铝陶瓷涂层的组织与相结构分析
The study of corrosion resistance and anti-adhesion properties of the microorganism of ceramic coating under water-lubrication 水润滑条件下陶瓷涂层的耐腐蚀与抗污性能研究
A bottom layer of metal is attached between the braking face and the ceramic coating. 于所述刹车面与陶瓷涂层之间还附着有一金属底层。
Corrosion and thermal shock behavior of Al_2O_3 ceramic coating in molten zinc 氧化铝涂层在熔融锌液中的腐蚀及热震行为
Preparation of Plasma Sprayed Ceramic Coating of the Surface of Blade Made of Steel 等离子喷涂制备钢质涂布刮刀陶瓷涂层
Research on Microstructure and Properties of In-situ Synthesized Ti ( C, N) Ceramic Coating by Laser Cladding 激光熔覆原位自生Ti(C,N)陶瓷涂层组织性能研究
Formulas of an inorganic high-temperature ceramic coating was studied quantificationally with a method of uniform design. 采用配方均匀设计方法,对无机耐高温腐蚀陶瓷涂料的配方进行了定量研究。
The effects of positive and negative voltage on phase constitution of ceramic coating on aluminum alloy prepared by micro-arc oxidation were studied by XRD analysis. 通过XRD分析,研究了正向、负向电压对铝合金微弧氧化陶瓷层相组成的影响。
Biomimetic synthesis is a new process of fabricating inorganic ceramic coating. 仿生合成是制备无机陶瓷涂层的新途径。
Preparation and properties of Al_2O_3 based composite ceramic coating on pure copper surface by thermo-chemical reaction spraying 热化学反应喷涂Al2O3基复合陶瓷涂层的制备及其性能
Influences of main parameters such as composition of electrolyte and electrical parameters in preparing black ceramic coating by microplasma oxidation on ADC12 aluminum alloy were studied. 研究了ADC12铝合金表面微等离子体氧化法制备黑色陶瓷膜的电解液成分和电参数等对膜层性能的影响。